打开主菜单

Ballance Wiki β

Stone-and-box

Chinese version / 中文版: 落石

Stone-and-box
Modul 34 ingame.png
Stone-and-box in level 1, section 2
Basic information
Modul P_Modul_34
Name Stone-and-box
Appears in 1, 5, 7, 10, 11, 13

Stone-and-box or modul 34 is an object consisting of two parts. The top part is the stone block or falling stone, which is a slidable "road block" that can only move in a straight line between itself and the center point of the box. The bottom part is the small box, which has the same width and height but is slightly narrower than the common object Box. It is a relatively common object in Ballance.

Among them, the model of the small box is P_Modul_34_Kiste (Kiste means "box" in German), and the model of the stone block is P_Modul_34_Schiebestein (Schiebestein means "sliding stone" in German).

目录

Function

In the original levels, it often plays a role in hindering the progress of player ball: the stone block obstructs the upper road, and the player must go to the bottom to push the small box away, so that the stone block falls and becomes the upper road. Of course, sometimes it is necessary to use a Prop Ball to complete this process, or the object itself needs to be pushed to let the prop ball pass.

In some custom maps like Ballance Empire, it is placed on the elevator. The stone block will not sink the elevator. It's more like a normal clutter that doesn't move.

In custom levels like Journey to New Horizons and Einsteinia, the stone-and-box are positioned horizontally, and the two parts are separated. The stone blocks will float in the air and move in a straight line with almost no friction. At this time, it can carry the paper ball to move to another area, or be pushed to another location to pave the road.

It should be noted that the farther the stone block is from the initial position, the more unstable it is, and it can cause a bug. Therefore, the special usage in custom levels should only allow the player to touch in the state of a paper ball, and cannot move too far; otherwise player ball is easy to be launched to a very far position, and game can even crash.

Physical Data

Stone-and-block is in the nmo file under the \Ballance\3D Entities\PH folder. It consists of two parts: P_Modul_34_Kiste (small box) and P_Modul_34_Schiebestein (stone block).

 
Comparison of the size of the small box (right side) and the normal box (middle) in Virtools. On the left side, the stone block is inverted, and you can see that the bottom surface exists, and it has the Floor_Top_Flat texture
object hitbox edge length friction flex mass/ton linear damping rotation damping
Small box 4.1×4.1×5 meters (0.82×0.82×1 units) 0.8 0.4 1.4 0.1 0.1
pavement 5×5×5 meters (1×1×1 units) 0.5 0.4 1.6 0.1 0.1

Attached are the physical parameters of regular boxes:

object Collision box edge length/meter friction flex mass/ton linear damping rotation damping
Box 5*5*5 0.7 0.3 1.0 0.1 0.1

Special Physical Properties

The stone block is fixed on an axis using Set Physics Slider . The axis are determined by P_Modul_34_Slider_Frame01 and P_Modul_34_Slider_Frame02.

Gallery